Helical Geared Motors
The Conventional Solution for Your Drive Application
Helical geared motors are the conventional solution for your drive application. Helical gear units are coaxial units where the gear unit output shaft is in-line with the motor shaft.
A solid shaft is always used as output shaft. Additional components – e.g. gear wheels or chain wheels – to transfer the force to the driven load are therefore required.
Solutions utilizing helical geared motors are capable of an extreme variable speed range.
In many cases, helical geared motors represent the most cost-effective solution for your drive task.
MOTOX helical geared motors are available for the power range up to 200 kW and rated gear unit torques up to 20,000 Nm. These geared motors are available in the following versions:
-
Foot and flange-mounting versions
-
Solid shaft
Typical Applications
Helical geared motors are, for instance, used in roller conveyors, agitators, roller table drives, woodworking machines, ...
Gear unit designation | No. of stages | Ratio range | Max. rated |
---|---|---|---|
E38 | 1 stage | 1,59 - 9,33 | 82 Nm |
E48 | 1 stage | 1,52 - 11,30 | 170 Nm |
E68 | 1 stage | 1,41 - 12,40 | 250 Nm |
E88 | 1 stage | 1,71 - 10,33 | 450 Nm |
E108 | 1 stage | 1,81 - 5,46 | 745 Nm |
E128 | 1 stage | 1,36 - 10,14 | 1.000 Nm |
E148 | 1 stage | 1,64 - 13,67 | 1.550 Nm |
Z18, D18 | 2 stage, 3 stage | 3,58 - 200,36 | 90 Nm |
Z28, D28 | 2 stage, 3 stage | 3,33 - 241,05 | 140 Nm |
Z38, D38 | 2 stage, 3 stage | 4,77 - 191,75 | 220 Nm |
Z48, D48 | 2 stage, 3 stage | 4,28 - 208,77 | 450 Nm |
Z68, D68 | 2 stage, 3 stage | 3,49 - 281,01 | 800 Nm |
Z88, D88 | 2 stage, 3 stage | 3,11 - 300,41 | 1.680 Nm |
Z108, D108 | 2 stage, 3 stage | 3,42 - 359,30 | 3.100 Nm |
Z128, D128 | 2 stage, 3 stage | 3,07 - 268,16 | 5.100 Nm |
Z148, D148 | 2 stage, 3 stage | 4,44 - 336,11 | 8.000 Nm |
Z168, D168 | 2 stage, 3 stage | 4,46 - 341,61 | 14.000 Nm |
Z188, D188 | 2 stage, 3 stage | 8,30 - 243,82 | 20.000 Nm |